Low Temperature Iron Phosphate Coating for multi-metals - Freiborne Industries, Inc Low Temperature Iron Phosphate Coating for multi-metals - Freiborne Industries, Inc

Product Type: Freibond 24
   

FREIBOND 24 is a high quality low temperature iron phosphate coating chemical for mixed production of steel, aluminum, and galvanized surfaces. FREIBOND 24 is designed to impart a uniform coating excellent for bonding paint.

FREIBOND 24 is a high quality low temperature iron phosphate coating chemical for mixed production of steel, aluminum, and galvanized surfaces. FREIBOND 24 is designed to impart a uniform coating excellent for bonding paint.

Stainless steel, mild steel, and high temperature acid resistant plastics are suitable for processing equipment. Full cone spray nozzles, such as Spraying Systems WhirlJet® nozzles, are normally used in spray applications to ensure uniform application of FREIBOND 24. Spray pressures should be maintained between 15 and 20 psig. Spray pressure above 20 psig will create inconsistencies and voids in the iron phosphate coating.

To charge the tank, fill to the three-quarter level with water and for each 1000 gallons of working solution add:

• Spray Applications: 33 gallons (337 pounds) of Freibond 24 and 10 pounds of Neutralizer 1

• Immersion Applications: 66 gallons (675 pounds) of Freibond 24 and 20 pounds of Neutralizer 1

Bring the tank up to the working level with water and heat to the operating temperature, from 80°F– 160°F. Once the optimum temperature determined, it should be maintained within ±5°F. A processing bath built up according to these recommendations will result in 10 points of Total Acid and a pH adjustment value of 0.4 (pH of 5.0) for spray applications and 20 points of Total Acid and a pH adjustment value of 2.6 for immersion applications.

An appropriate Freiclean product, followed by a rinse stage, should precede FREIBOND 24 phosphating application. The rinse stage ahead of the FREIBOND 24 can be adjusted with Additive 37P, at 0.5 to 2.0 points of total acid, to prevent alkaline cleaner drag-in and prepare the substrate for phosphating.
To maintain the bath’s performance it should be regularly tested and adjusted to within operating parameters. Normal processing time with FREIBOND 24 is 60 seconds but processing times often range from 30 to 120 seconds. Processing parameters can vary widely based on individual processes and performance requirements. Typical operating parameters are listed below. Your Freiborne representative will help develop the proper operating parameters for your specific
needs.

The pH value can be run on the negative, or free acid, side when numerous welds or laser cutting oxides are present. Consult your Freiborne representative to determine what are the optimum operating parameters for your particular situation.
The FREIBOND 24 treatment is typically followed by a rinse stage and a chrome free final seal rinse such as Freicon 33.

Control is based on Total Acid with pH adjustment.

Total Acid Test:
Pipet a 10 ml sample into a suitable beaker or Erlenmeyer flask and add 4 drops of Indicating Solution 14 (thymolphthalein). Titrate with Testing Solution 11 (0.1N NaOH) to a permanent faint blue endpoint. Addition of 30 lbs (3.0 gallons) of FREIBOND 24 per 1000 gallons will raise the Total Acid by 1 point.

pH Adjustment:
Pipet a 10 ml sample into a suitable beaker or Erlenmeyer flask and add 4 drops of Indicating Solution 2 (Bromcresol green). If the sample turns blue titrate with Testing Solution 20 (0.1NH2SO4) from blue to green. If the sample turns green or yellow, a negative pH adjustment value is indicated. Titrate with Testing Solution 11 to a blue color.

Use Additive 37P to adjust the pH value down if the Total Acid is within normal operating parameters. Use Freibond 24 to adjust the pH value if the Total Acid is below the normal operating parameters. To lower the pH adjustment by 0.1 points, add 4 lbs (1514 mls) of FREIBOND 24 or 190 mls of Additive 37P per 1000 gallons of solution.

To raise the pH adjustment by 0.1 points, add 7 oz of NEUTRALIZER 1 or 450mls of NEUTRALIZER 35 per 1000 gallons of working solution.

Additional Information

Applications

Paint Pretreatment

Substrate

Carbon Steel, Galvanized Steel, Aluminum

Temp Range

80-160

Product Type

Coatings

Product Line

Freibond

Method

Spray

Ordering Information

To place an order, please contact our knowledgeable and professional customer service team:
CLICK TO SUBMIT AN ITEMIZED RFQ

If you are unable to find what you need or require a custom formula, please call and speak with one of our knowledgeable Formula Engineers. They can walk you through the ordering process quickly and professionally.