Mild Alkaline Liquid Floor Cleander/Degreaser - Freiborne Industries, Inc Mild Alkaline Liquid Floor Cleander/Degreaser - Freiborne Industries, Inc

Product Type: Freiclean FC-1
   

Concentrated cleaner for general cleanup around the shop and perfect for use in floor scrubber machines. Freiclean FC-1 is non-hazardous, low foaming, and is excellent at removing oils from hard surfaces. Customers have experienced over 50% reductions in chemical consumption, longer cleaner life, and lower disposal costs when switching to Freiclean FC-1.

Clear

FREICLEAN FC-1 is a Non-Hazardous mild alkaline liquid floor cleaner with excellent degreasing  properties designed for the superior penetration and removal of oily/greasy particulate and soils from concrete floors. FREICLEAN FC-1 rapidly breaks waste oils/insolubles from solution allowing for easier oil separation and waste treatment. FREICLEAN FC-1 is also very effective in parts washers for removing oily based soils from alloys.

Key Advantages:

• Non-Hazardous
• Biodegradable
• Low to Zero VOC
• Low Foaming
• Low Dynamic Surface Tension for optimum cleaning

 

 

FREICLEAN FC-1 is easily diluted in water to concentration from 2-10% by volume. Recommendations are shown below.

Mop/Bucket Use:
Dilute FREICLEAN FC-1 in water at a concentration of 5-10% depending on the severity of the job.

Mechanical Floor Scrubber Use:
Dilute FREICLEAN FC-1 in water at a concentration of 2-5% depending on the severity of the job.

Parts Washer Use:
Dilute FREICLEAN FC-1 in water at a concentration of 2-10% depending on the severity of the job.

When used in mechanical floor scrubbers or for mop bucket testing normally isn’t necessary. When used in parts washers testing and adjusting the concentration is required to maintain the effectiveness of the cleaning solution.

The concentration of the FREICLEAN FC-1 solution may be determined as follows:

1. Measure a 100 ml sample of the solution to be tested using a 100ml graduated cylinder and transfer it into a 250 ml Erlenmeyer flask or suitable beaker
2. Add 5 – 10 drops of Indicating Solution 2 (Bromocresol Green)
3. Titrate the blue solution to a yellow endpoint with Testing Solution 20 (0.1NH2SO4).

The % by volume FREICLEAN FC-1 = 0.385 x mls Testing Solution 20

Additional Information

Temp Range

Ambient-180

Substrate

Carbon Steel, Galvanized Steel, Stainless Steel, Aluminum

Applications

Stamping, Paint Pretreatment, Cleaning

Product Type

Cleaner

Product Line

Freiclean

Method

Spray or Immersion

Ordering Information

To place an order, please contact our knowledgeable and professional customer service team:
CLICK TO SUBMIT AN ITEMIZED RFQ

If you are unable to find what you need or require a custom formula, please call and speak with one of our knowledgeable Formula Engineers. They can walk you through the ordering process quickly and professionally.