Water Emulsifiable Corrosion Protection Oil for Bare Or Galvanied Steel - Freiborne Industries, Inc Water Emulsifiable Corrosion Protection Oil for Bare Or Galvanied Steel - Freiborne Industries, Inc

Product Type: Freiborne Oil 2574
   

Oil 2574 is a premium quality, soluble oil type, hydrocarbon based rust preventative. It is designed to provide a light oily film. The product contains no barium compounds and has excellent emulsification characteristics. Oil 2574 provides corrosion protection on both steel and galvanized substrates.

Oil 2574 is a premium quality, soluble oil type, hydrocarbon based rust preventative. It is designed to provide a light oily film. The product contains no barium compounds and has excellent emulsification characteristics.

Oil 2574 provides corrosion protection on both steel and galvanized substrates.

Appearance                                Dark Amber Liquid
Odor                                              Bland
Density (lbs/gal)                       7.9 +/-0.3
Flash Point, C.O.C., oF               250

Oil 2574 is recommended to be used between 5% and 20% in either a heated soak tank (160 – 180 deg. F) or as an ambient spray. When used in a soak tank the immersion time should be sufficient to allow the parts to reach solution temperature.

The working solution should be tested and adjusted on a routine basis by one of the following methods

ACID SPLIT METHOD
1. Measure 50 mL’s. of the bath into a 100 ml Graduated cylinder
2. Add 40 mls of Testing Solution #44 (50% H2SO4).
3. Mix and allow to stand for one hour (95% separation will occur in the first few minutes. Additional heat supplied by a water bath will aid in separation)
4. Note number of mL’s. of the oily layer.
5. mL’s. of the oily layer x 2.0 = % by volume of Freiborne Oil 5WX.

SALT WATER SPLIT METHOD
1. Measure 50 mL’s. of the bath into a 100 ml Graduated cylinder
2. Add 40 mls of salt solution (salt solution = NaCl at 2lbs/gallon or 240g/l)
3. Mix and allow to stand for one hour (95% separation will occur in the first few minutes. Additional heat supplied by a water bath will aid in separation)
4. Note number of mL’s. of the oily layer.
5. mL’s. of the oily layer x 2.0 = % by volume of Freiborne Oil 5WX.

REFRACTOMETER: A refractomerter that reads from 0 to 16 or 0 to 30 Brix with automatic temperature compensation should be used.

Health, Safety, and Environmental

Oil 2574 contains petroleum products and an oxygenated hydrocarbon to prevent corrosion. Oil mists are recognized as hazardous by OSHA when present in air at 0.5 mg/M3. Use with good ventilation. Read Material Safety Data Sheet before using this product.

Additional Information

Applications

Protection

Substrate

Carbon Steel, Gavanized Steel

Temp Range

160-180

Product Type

Protectant

Product Line

Freiborne Oil

Method

Spray or Immersion

Ordering Information

To place an order, please contact our knowledgeable and professional customer service team:
CLICK TO SUBMIT AN ITEMIZED RFQ

If you are unable to find what you need or require a custom formula, please call and speak with one of our knowledgeable Formula Engineers. They can walk you through the ordering process quickly and professionally.